Products and Manufacturers
:: RMHI Products
:: Bins & Tote Boxes
:: Bulk Containers
:: Crane Systems
:: Dock Equipment
:: Industrial Seating
:: In-Plant Buildings
:: Flow/Carton Storage
:: Mezzanine Systems
:: WireCrafters Wire
:: Modular Drawer
By Item #
Yale Model KELC
Item # KELC
Email This Page
Save To Favorites
Item # KELC, Electric Hoist
Yale Portable Electric Hoists are precision built chain type hoists ranging in six rated load sizes from 1/4 ton through 3 tons with various lifting speeds and electrical power supplies. In addition to the capacities, there are model variations with hook or lug type suspension, and single or two speed. In addition to standard models, there are four rated load sizes of Yale Electric Hoists ranging from 1/4 ton through 2 tons suitable for plating hoist service with various lifting speeds and electrical power.
NEW Heavy-Duty Motor Brake
AC spring set disc brake for positive braking action and long life with minimal maintenance. Easy 1-step adjustment procedure.
Prevents lifting loads beyond the hoist’s load range, which may damage the hoist or supporting structure. Optional mechanical load brake available.
Hook suspension permits portability of the hoist while lug suspension reduces headroom and can be used with any of our rigid-mount trolleys. New design allows easy change out of either hook or lug suspension.
Totally enclosed, oil-bath lubricated for long life.
High-Torque, Heavy-Duty Hoist Motor
Motors are H4 30-minute rated with class “F” insulation and include a thermal actuated switch (TAS) embedded in the motor winding for protection.
Load Sprocket & Chain Guide
Provided with a full floating chain guide that assures proper engagement of chain on sprocket.
Provided with a 360° rotating hook riding on thrust bearings. The hook is provided with a spring-loaded latch as standard.
Standard push-button control station is contoured for operator comfort allowing easy one-handed sure grip control and provided with a weatherproof NEMA-4X enclosure. The push-button cable is provided with built-in strain relief to help prevent cable damage.
Paddle Limit Switch
Paddle upper & lower control limit switch standard on all hoists.
Die-Cast Aluminum Alloy Housing and Frame
Lightweight & rugged. Housing is precision machined for accurate gear and bearing alignment.
Included as standard for lifts up to 30' (1/4-1 ton capacities) or 20' for 2 & 3 ton capacities.
Single speed (standard) or optional two speed and variable frequency for precision handling is located under a removable cover for easy access.
Powder Coat Finish
Provides a long lasting durable finish and added resistance to corrosive environments.
10 feet standard, additional lifts available.
5 to 64 FPM
AC Power Supply
115/230 1-60 HZ; 230/460-3-60 reconnectable or 208 and 575-3-60 single voltage
Push-button control voltage of 115-volts standard on all models. 24-volt control optional.
Hook and Lug
Regional Material Handling, Inc.
| 266 West Coleman Blvd., Suite 204, Mt. Pleasant, SC 29464 | P: 843.569.3444 | F: 843.569.3447 | www.rmhinc.com |
Site created by
Thomas Web Solutions